Origin	China
Model Number	YN-128 P1

Specification:

Type:frequency 433MHz,four digit code available

Transmitter size: (L×W×H):80x25x18mm

Receiver sizes：(L×W×H):50x40x30mm(included hot shoe)

Battery:transmitter-23A,Receiver-CR 2

Battery life :Approximately to use 1000 time within support area

Transmission ranges :Approximately 100meters(under spacious non disturbance environment)

Function

The transmitter has the signal condition toinstruction:green light is focusing,and red light is shutter or B mode.Receiveris user –friendly ,not only has the independent power supply switch,but also has apair of lamp status indicator.One lamp is always turned on when the power switched on,another lamp will on when received signal.

The normal length is 50cm and extended approximately 150cm,it’s suitable to carry,also the receiver can use without transmitter.

How to use

Normal shooting :turn on the receiver power switch,.when the transmitter function switch establishes as B condition ,press fully button from transmitter ,at this moment the transmitter transfers the shooting from focusing,the receiver’s signal light is turn on at the same time

B mode shooting:turn on the receiver power switch,.when the transmitter function switch establishes as B condition ,press fully button from transmitter ,until the transmitter signal light to off,the receiver instructed tha enter to shoot condition ,at this moment,the receiver lamp is always turned red ,B mode is on ,if want to turn offthe B mode control,just only need to press fully down the transmitter button.

Delay shooting : turn on the receiver power switch,.when the transmitter function switch establishes as B condition ,press fully button from transmitter button to fully down,and then start camera focusing and the delay shoting function.when the transmitter condition indicating lamp changes to shooting from focusing ,the receiver will start to three seconds delay shutter movement automatically

suit for PANASONIC: FZ10/FZ15/FZ20/FZ25/FZ30/FZ50